Jake Bourn, Vice President, Global Operations & International Sales, explains the problems companies experience when managing corrosion under insulation and how the OpenVision Method fits into the Risk-Based Inspection (RBI) approach to managing CUI.
Jake Bourn, Vice President, Global Operations & International Sales, answers frequently asked questions about the safety, scanning capability, and reporting features of the OpenVision DX real-time digital x-ray system.
Performing Leak Tests on your SENTINEL Gamma-Ray Source Projector ensures the device is safely shielding the radioactive source. Theo Ewing, from the QSA Global, Inc. Baton Rouge Service Center, walks you through how to perform a Leak Test using a SENTINEL 880 Series Source Projector. You should perform a Leak Test on your DU Shielded Body once a year and on your sealed radioisotope sources every 6 months to ensure there is no contamination.
Theo Ewing, from the QSA Global, Inc. Baton Rouge Service Center, walks you through the inspection points you should perform on your drive cable when you are doing the daily inspection of your SENTINEL Gamma-Ray Source Projector.
Theo Ewing, from the QSA Global, Inc. Baton Rouge Service Center, explains how to properly perform a misconnect test on the SENTINEL 880 Series Delta Gamma-Ray Source Projector. This quick and simple misconnect test should be performed on a quarterly basis or any time you have a change in controls or projectors.
This video shows how QSA Global, Inc.’s SENTINEL 1075 SCARPro gamma radiography source projector and the included contact fixture kit can help you obtain up to 98% reduction in exclusion zones compared to conventional radiography techniques.
View how to operate the OpenVision DX to help you inspect hundreds of feet (many tens of meters) of insulated piping to quickly identify indications of corrosion or corrosion precursors such as scaling, external wall loss, and wet insulation.
This brief video shows how to easily and reliably connect your SENTINEL Guide Tube and Remote Controls to a SENTINEL 880 Series Delta Gamma-Ray Source Projector.
Designed for safety and productivity, QSA Global, Inc.'s SENTINEL 880 Series Gamma-Ray Source Projectors ensure consistent, reliable results. This video features the robust lock slide and remote controls interface that ensures your sealed radioisotope source is secured.
This video will show you how the patented guide tube interlock on QSA, Global, Inc.'s SENTINEL 880 Series Gamma-Ray Source Projector shields the source path to minimize operator dose while you are connecting the source guide tube to the camera.
This video shows a pipe that was scanned using QSA Global, Inc.'s OpenVision DX. The video output from the scan shows indications of scaling, pitting, joints, welds, and corrosion.
Need to change your 1075 SCARPro from a category II projection-style source projector to a category I close-contact configuration? Theo Ewing, from the QSA Global, Inc. Baton Rouge Service Center, has you covered in this step-by-step instructional video.
The 1075 SCARPro includes a contact fixture kit that you can securely mount to any diameter pipe to help you obtain up to 98% reduction in exclusion zones compared to conventional radiography techniques. Contact shots are typically preferred on piping 3" OD and above. Learn more about the 1075 SCARPro
QSA Global, Inc. Headquarters
40 North Avenue
Burlington, MA 01803