Utilizing a thinner window and energy compensated Geiger Muller tube the Tracerco T406 handheld x-ray radiation monitor is more accurate at detecting X-rays than standard radiation monitors.
With an audible response, adjustable alarm thresholds, and peak measurement facility, you can use it to detect radiation scatters around x-ray systems, such as the OpenVision DX, and diagnostic imaging equipment. The large clear display makes it easy to take readings as they happen, and the unit is very easy to clean, making it more hygienic than traditional x-ray monitors.
Packed in a robust and water-resistant design the T406 is ideal for NDT, oil and gas, and nuclear companies. It is also widely used in medical and life sciences, nuclear, CBRNe and emergency services, NDT, manufacturing and industrial, and environmental and waste management industries.
|Detector||Single, thin window energy compensated Geiger Muller tube|
|Radiation Detected||17 keV to 1332 keV|
|Dose Rate Range||Bar graph display: 0-1,000 μSv/h
Digital numeric display: 0-1,000 μSv/h (0-100 mrem/h)
|Accumulated Dose Range||Digital numeric display: 0-1,000 μSv (0-100 mrem)|
|Peak Radiation Dose Rate||Digital numeric display: 0-1,000 μSv (0-100 mrem)|
|Over Range Response||Bar graph display will read full scale. The digital numeric display will show 0UEr (over)|
|Measurement Modes||Can be supplied with either mrem/h or μSv/h display|
|Battery||Standard 9V PP3 battery|
|Battery Life||100 hours typically with background radiation|
|Low Battery Indication||On 4 hours battery life remaining|
|Variation with Battery Voltage||Less than 2%|
|Case Material||Robust, chemical resistant polymers|
|Weight||1.3 lbs (600 g)|
|Variation with Temperature||Less than ± 5% over temperature range -10° C to 40° C (14° F to 104° F)|
|Ingress Protection Rating||Rated IP65 (dust-tight and will withstand water jets)|
|Humidity Range||0 - 95%|
|Standard Compliance||EU Directives: 2004/108/EC Electromagnetic Compatibility Directive|